Plastic Shredder Machines can be used for recycling of all plastic and PVC materials

The re-recovery and utilization of materials have very good production effects. In addition, you can customize the production of plastic shredder machine according to different hardness, different lengths, and different characteristics of PVC materials, which can more effectively and more quickly complete the shredding treatment of relative materials.

It is relatively rare for recycling of a single material, because it is difficult for users to recover waste. Most users recycle different materials like paint buckets, cans, bicycles, color steel tiles, car shells, etc. Do not refuse, if you want to use a machine to break all of them, you need to use what we call a multifunctional shredder machine.

The wooden pieces are shredded by shredder machine, too. The high -strength wear -resistant steel plate is welded and reinforced. The blade on the shredded rotor is forged with alloy, which has the characteristics of high hardness, wear resistance, and other characteristics. Relying on the strength of the reducer, the torque force is driven to drive the rotor to turn the knife tray to rotate the blade, and the bite, cutting, squeezing, and shredding. When the shredder machine is working, the material can be fully and effective in the shredding cavity. Tear, high yield, low energy consumption, high efficiency, uniform discharge. And when using this device, noise, no pollution, simple operation and convenient maintenance. The use of wood shredders is widely used, reflecting its good mechanical properties and the commercial value brought about. The urgent need of the wood shredder market also brings infinite business opportunities to investors.

Plastic Shredder Machine Manufacturer

In recent years, with the rapid development of cars and the increasingly lack of virgin rubber, how to effectively use the use of waste tires has become a problem for humans to be solved. High, some saw the waste tires hand -made into small pieces, and then crushed, and then used the efficiency to be extremely low. How to effectively use waste tires to use waste tires to become a key research topic for rubber production.

The plastic shredder is small, convenient to move; manual operation, simple and safe; built -in garbage bags are fixed with locks, stability and not easy to slip, and the equipment is strong and durable.

I hope buyers and customers will understand this. When buying metal shredder machines, don't be greedy for cheap, not requiring the equipment to be cheap. Only by paying attention to the quality of the device can you purchase metal fragmers with good performance and good efficiency.

Plastic Shredder Machine Price

Recycling and using rubber garbage. In fact, many rubber products in our lives can be recycled and reused. As long as we shred it into a small enough particles, we can put it into the squeeze machine melting and squeezed out, but the key point is that it is lies in the point, but the key point is : The rubber garbage particles for remedies must be small enough, because the processes before the granulation process are squeezed out of the tires and other rubber products first. People are no longer separated from cars, and therefore produce a large tire rubber garbage garbage. The recycling and utilization of tires is a large market, and tire shredder is a practical helper for the recycling of rubber products.

And the knife is a four -corner surface that can be used with a knife. After dull, remove the replacement angle, and then grind the knife until the four sides are blunt. Because it is a claw knife, the rotating cut is cut, and the knife and the sword are H13 material. After the heat treatment, the hardness is HRC60 ° or above, so the service life is long, the cutting capacity is strong, and the production capacity is