What are the Precautions for Using Plastic Granulator for the First Time?

As a Low-Speed Granulator Manufacturers, share with you. Notes on the first use of plastic granulator:

Before starting the machine, first warm up for about 40 minutes. Raise the temperature until the motor V-belt is pulled by hand until it is free; pull it continuously for eight to ten times in the normal working direction. Then continue to heat up for about ten minutes, and then turn on the machine, but continue to heat up, because normal production needs to continue to add heat; adjust different temperatures according to different properties of plastic. When the plastic granulator is working normally, the temperature of the machine should be stable, and don't go up and down. Near the vent hole, the temperature of the head part should be kept at about 200 ℃ (refer to material C and material B). The feeding shall be uniform, and there shall be no shortage of materials. The machine's feeding speed and feeding speed should be properly matched. Otherwise it will affect the quality and output of the pellets. When shutting down, the host should cut off the power completely. The head screw plug (part with wrench) must be removed. Warm up separately before next use.

Low-speed Granulator

In the work, the Plastic Granulator should be maintained and maintained, and this maintenance and maintenance should also be operated according to certain regulations, which is conducive to the operation of mechanical equipment, and at the same time, it is maintained according to the relevant requirements of the corresponding equipment safety technical performance, which can be effectively Ensure greater safety of plastic granulator equipment and personnel.

1. Delivery and maintenance of equipment

When the plastic granulator is in normal operation, it should be carried out in accordance with the rules and regulations. Daily and regular maintenance, regular maintenance, maintenance and repair of mechanical equipment several times within the specified time to Maintenance is carried out as the central content. Routine maintenance is mainly responsible for cleaning, tightening, lubrication, adjustment, anti-corrosion, this is checked every day.

2. Check before equipment installation

The plastic granulator is also composed of various components. Before installation, check the various equipment components, check the main steel structure, bearings, bolts, etc., and check whether the surface conditions of the parts are anti-corrosive. Record for future inspection.

Our company also has Low-speed Granulator for sale, please contact us.