Heavy-duty Granulator host current instability processing method

The reason for the host current instability method is:

(1) Heavier-duty Granulator feeding unevenness may cause the host current to be unstable.

(2) The main motor bearing is damaged or poorly lubricated.

(3) A certain stage of the plastic granulator failed, not caused by heating.

(4) The screw adjustment pad is incorrect, or the phase is wrong, and the components interfere.

Processing method:

(1) Check the feeder to see if there is a fault. If there is a fault, it should be corrected in time.

(2) Repair the main motor of the plastic granulator and replace the bearing if necessary.

(3) Check that each heater is working properly and replace the heater if necessary.

(4) Check the adjustment pad and pull out the screw to check the screw for interference.

Heavier-duty Granulator

Plastic Granulator is mainly used for the recycling of waste plastic products in daily life. What are the characteristics of plastic pellets? How to rely on the trust of the majority of users?

Several common plastic granulator types:

There are many types of plastic granulators. According to the number of screws in the plastic granulator, there are single-screw plastic granulator, twin-screw plastic granulator and multi-screw plastic granulator. The single-screw plastic granulator can be further divided into a vented single-screw plastic granulator and a general-purpose single-screw plastic granulator. The twin-screw plastic granulator has two types of screw rotation and counter-rotation and parallel twin-screw and conical twin-screw.

There are mainly these reasons:

1 Plastic granulator equipment structure is relatively simple, low cost, plastic pellet molding products production line investment is relatively small.

2 Plastic granulator molding granules can be continuously produced, and the production efficiency is relatively high.

3 The length of the extruded pellets can be extended indefinitely as needed.

4 The extrusion molding production operation is relatively simple, the product quality is relatively easy to guarantee, and the production and molding manufacturing cost of the product is low.

5 The production line for the production of plastic granulators has a small production area and a relatively clean production environment.

6 Plastic granulator molding granules have a wide range of applications, can be extruded into a variety of thermoplastic pellets, can also be used to mix raw materials, plasticized raw materials and supply of molten solvent and granulation for calendering.

7 Plastic granulator maintenance and repair is relatively easy and simple.

Plastic granulators can extrude which plastic products:

Plastic Pipes Granulator continuously extrudes plastic pellets of various cross-section geometries and can be used in films, sheets, sheets, tubes, hoses, bellows, profiles, wires, cables, packaging tapes, rods, nets and Composite film, etc. The plastic granulator can periodically produce hollow products such as barrels and bottles.