Home >  News

Ways To Increase The Life Of Gravimetric Blender

Sep. 12, 2018

The Gravimetric Blender brings great convenience to our production and life. How to maintain Gravimetric Blender to improve the life of Gravimetric Blender?

1. After work and when the machine is not in use, the power should be cut off and the switch box should be locked to ensure safety.

2. After starting the machine, always pay attention to whether the operation of the components of the gravimetric blender is normal. When shutting down, always check if the mixer blades are bent and the screws are knocked down or loose.

3, Gravimetric blender should be set in a flat position, with the front and rear axles, so that the tires are overhead, so as not to move around when starting.

4. Check whether the transmission clutch and brake are flexible and reliable, whether the wire rope is damaged, whether the track pulley is good, the surrounding is unobstructed and the lubrication of each part.

5, Gravimetric blender should implement secondary leakage protection, must be carefully checked after the power is turned on before going to work, and can only be used after passing the empty car test. During the test run, check that the mixing drum speed is appropriate.

6. Gravimetric blender must clean the internal plastic every time you change plastics of different nature.

7. The direction of rotation of the Gravimetric blender should conform to the direction indicated by the arrow. If it is not true, the motor wiring should be corrected.

We are Gravimetric Blender Manufacturer, we can help you solve any problems with Gravimetric blender, if you are interested in our products, you can contact us.

Gravimetric Blender Manufacturer

Contact us
  • Mobile:+86 138 1984 3291
  • Tel: +86 574 8623 6922
  • E-mail: sales@aumax-plast.com
  • Skype: aumax.plast
  • Add: Ningbo Economic & Tech Development Zone, Xiaogang, Beilun, Ningbo, China